WAT, §1A diff (2016 → 2017)

Item 1A: Risk Factors The Company is subject to risks common to companies in the analytical instrument industry, including, but not limited to, the following: The Company’s international operations may be negatively affected by political events, wars or terrorism and regulatory changes, related to either a specific country or a larger region. These potential political, currency and economic disruptions, as well as foreign currency exchange rate fluctuations, could have a material adverse effect on the Company’s results of operations or financial condition. Approximately 71% and 69% of the Company’s net sales in 2017 and 2016, respectively, were outside of the United States and were primarily denominated in foreign currencies. In addition, the Company has considerable manufacturing operations in Ireland and the United Kingdom, as well as significant subcontractors located in Singapore. As a result, a significant portion of the Company’s sales and operations are subject to certain risks, including adverse developments in the political, regulatory and economic environment, in particular, uncertainty regarding possible changes to foreign and domestic trade policy; the effect of the U.K. voting to exit the European Union as well as the financial difficulties and debt burden experienced by a number of European countries; the instability and potential impact of war or terrorism; the instability and possible dissolution of the Euro as a single currency; sudden movements in a country’s foreign exchange rates due to a change in a country’s sovereign risk profile or foreign exchange regulatory practices; tariffs and other trade barriers; difficulties in staffing and managing foreign operations; and associated adverse operational, contractual and tax consequences. Additionally, the U.S. dollar value of the Company’s net sales, cost of sales, operating expenses, interest, taxes and net income varies with foreign currency exchange rate fluctuations. Significant increases or decreases in the value of the U.S. dollar relative to certain foreign currencies, particularly the Euro, Japanese yen and British pound, could have a material adverse effect or benefit on the Company’s results of operations or financial condition. Global economic conditions may decrease demand for the Company’s products and harm the Company’s financial results. The Company is a global business that may be adversely affected by changes in global economic conditions. These changes in global economic conditions, both inside and outside the U.S., may affect the demand for the Company’s products and services. This may result in a decline in sales in the future, increased rate of order cancellations or delays, increased risk of excess or obsolete inventories, longer sales cycles and potential difficulty in collecting sales proceeds. There can be no assurance regarding demand for the Company’s products and services in the future. The Company’s financial results are subject to changes in customer demand, which may decrease for a number of reasons, many beyond the Company’s control. The demand for the Company’s products is dependent upon the size of the markets for its LC, LC-MS, thermal analysis, rheometry and calorimetry products; the timing and level of capital spending and expenditures of the Company’s customers; changes in governmental regulations, particularly affecting drug, food and drinking water testing; funding available to governmental, academic and research institutions; general economic conditions and the rate of economic growth in the Company’s major markets; and competitive considerations. The Company typically experiences an increase in sales in its fourth quarter as a result of purchasing habits for capital goods by customers that tend to exhaust their spending budgets by calendar year end. There can be no assurance that the Company’s results of operations or financial condition will not be adversely impacted by a change in any of the factors listed above or the continuation of uncertain global economic conditions. Additionally, the analytical instrument market may, from time to time, experience low sales growth. Approximately 56% of the Company’s net sales in both 2017 and 2016 were to the worldwide pharmaceutical and biotechnology industries, which may be periodically subject to unfavorable market conditions and consolidations. Unfavorable industry conditions could have a material adverse effect on the Company’s results of operations or financial condition. Disruption in worldwide financial markets could adversely impact the Company’s access to capital and financial condition. Financial markets in the U.S., Europe and Asia have experienced times of extreme disruption in recent years, including, among other things, sharp increases in the cost of new capital, credit rating downgrades and bailouts, severely diminished capital availability and severely reduced liquidity in money markets. Financial and banking institutions have also experienced disruptions, resulting in large asset write-downs, higher costs of capital, rating downgrades and reduced desire to lend money. There can be no assurance that there will not be future deterioration or prolonged disruption in financial markets or financial institutions. Any future deterioration or prolonged disruption in financial markets or financial institutions in which the Company participates may impair the Company’s ability to access its existing cash, utilize its existing syndicated bank credit facility funded by such financial institutions, and impair its ability to access sources of new capital. The cost to the Company of any new capital raised and interest expense would increase if this were to occur. Competitors may introduce more effective or less expensive products than the Company’s, which could result in decreased sales. The competitive landscape may transform as a result of potential changes in ownership, mergers and continued consolidations among the Company’s competitors, which could harm the Company’s business. The analytical instrument market and, in particular, the portion related to the Company’s HPLC, UPLC, LC-MS, thermal analysis, rheometry and calorimetry product lines, is highly competitive and subject to rapid changes in technology. The Company encounters competition from several international instrument suppliers and other companies in both domestic and foreign markets. Some competitors have instrument businesses that are generally more diversified than the Company’s business, but are typically less focused on the Company’s chosen markets. Over the years, some competitors have merged with other competitors for various reasons, some of which include increasing product line offerings, improving market share and reducing costs. There can be no assurance that the Company’s competitors will not introduce more effective and less costly products than those of the Company or that the Company will be able to increase its sales and profitability from new product introductions. There can be no assurance that the Company’s sales and marketing forces will compete successfully against the Company’s competitors in the future. Strategies for organic growth require developing new technologies and bringing these new technologies to market, which could negatively impact the Company’s financial results. The Company is in the process of developing new products with recently acquired technologies. The future development of these new products will require a significant amount of spending over the next few years before significant, robust sales will be realized. These new products will be sold into both the clinical and non-clinical markets, and any new products requiring FDA clearance may take longer to bring to market. There can be no assurance given as to the timing of these new product launches and the ultimate realization of sales and profitability in the future. In addition, despite testing prior to the release and throughout the lifecycle of a product or service, the Company’s software or hardware may contain coding or manufacturing errors that could impact their function, performance and security, and result in other negative consequences. The detection and correction of any errors in released software or hardware can be time consuming and costly. This could delay the development or release of new products or services, or new versions of products or services, create security vulnerabilities in the Company’s products or services, and adversely affect market acceptance of products or services. If the Company experiences errors or delays in releasing its software or hardware, or new versions thereof, its sales could be affected and revenues could decline. Errors in software or hardware could expose the Company to product liability, performance and warranty claims as well as harm to brand and reputation, which could impact future sales. Disruption of operations at the Company’s manufacturing facilities could harm the Company’s financial condition. The Company manufactures LC instruments at facilities in Milford, Massachusetts and through a subcontractor in Singapore; precision chemistry separation columns at its facilities in Taunton, Massachusetts and Wexford, Ireland; MS products at its facilities in Wilmslow, England, Solihull, England and Wexford, Ireland; thermal analysis and rheometry products at its facilities in New Castle, Delaware and other instruments and consumables at various other locations as a result of the Company’s acquisitions. Any prolonged disruption to the operations at any of these facilities, whether due to labor difficulties, destruction of or damage to any facility or other reasons, could have a material adverse effect on the Company’s results of operations or financial condition. The loss of key members of management and the risks inherent in succession planning could adversely affect the Company’s results of operations or financial condition. The operation of the Company requires managerial and operational expertise. None of the Company’s key management employees, with the exception of the President and Chief Executive Officer and the Senior Vice President and Chief Financial Officer, have an employment contract with the Company and there can be no assurance that such individuals will remain with the Company. If, for any reason, other such key personnel do not continue to be active in management, the Company’s results of operations or financial condition could be adversely affected. Failure to adequately protect intellectual property could have materially adverse effects on the Company’s results of operations or financial condition. The Company vigorously protects its intellectual property rights and seeks patent coverage on all developments that it regards as material and patentable. However, there can be no assurance that any patents held by the Company will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide competitive advantages to the Company. Conversely, there could be successful claims against the Company by third-party patent holders with respect to certain Company products that may infringe the intellectual property rights of such third parties. The Company’s patents, including those licensed from others, expire on various dates. If the Company is unable to protect its intellectual property rights, it could have an adverse and material effect on the Company’s results of operations or financial condition. The Company’s business would suffer if the Company were unable to acquire adequate sources of supply. Most of the raw materials, components and supplies purchased by the Company are available from a number of different suppliers; however, a number of items are purchased from limited or single sources of supply and disruption of these sources could have, at a minimum, a temporary adverse effect on shipments and the financial results of the Company. A prolonged inability to obtain certain materials or components could have an adverse effect on the Company’s financial condition or results of operations and could result in damage to its relationships with its customers and, accordingly, adversely affect the Company’s business. The Company’s sales would deteriorate if the Company’s outside contractors fail to provide necessary components or modules. Certain components or modules of the Company’s LC and MS instruments are manufactured by outside contractors, including the manufacturing of LC instrument systems and related components by contract manufacturing firms in Singapore. Disruptions of service by these outside contractors could have an adverse effect on the supply chain and the financial results of the Company. A prolonged inability to obtain these components or modules could have an adverse effect on the Company’s financial condition or results of operations. The Company’s business could be harmed by actions of distributors and other third parties that sell our products. The Company sells some products through third parties, including distributors and value-added resellers. This exposes us to various risks, including competitive pressure, concentration of sales volumes, credit risks and compliance risks. We may rely on one or a few key distributors for a product or market and the loss of these distributors could reduce our revenue or net earnings. Distributors may also face financial difficulties, including bankruptcy, which could harm our collection of accounts receivable. Violations of the U.S. Foreign Corrupt Practices Act (“FCPA”), the U.K. Bribery Act or similar anti-bribery laws by distributors or other third-party intermediaries could materially impact our business. Risks related to our use of distributors may reduce sales, increase expenses and weaken our competitive position. The Company may be harmed by improper conduct of any of our employees, agents or business partners. We cannot provide assurance that our internal controls and compliance systems will always protect the Company from acts committed by employees, agents or business partners that would violate domestic and international laws, including laws governing payments to government officials, bribery, fraud, kickbacks and false claims, pricing, sales and marketing practices, conflicts of interest, competition, export and import compliance, money laundering and data privacy. In particular, the FCPA, the U.K. Bribery Act and similar anti-bribery laws generally prohibit companies and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business, and we operate in many parts of the world that have experienced governmental corruption to some degree. Any such improper actions or allegations of such acts could damage our reputation and subject us to civil or criminal investigations in the U.S. and in other jurisdictions and related shareholder lawsuits, could lead to substantial civil and criminal, monetary and non-monetary penalties and could cause us to incur significant legal and investigatory fees. In addition, the government may seek to hold us liable as a successor for violations committed by companies in which we invest or that we acquire. We also rely on our suppliers to adhere to our supplier standards of conduct and material violations of such standards of conduct could occur that could have a material effect on our business, reputation and financial statements. The Company’s financial results are subject to unexpected shifts in pre-tax income between tax jurisdictions, changing application of tax law and tax audit examinations. The Company is subject to rates of income tax that range from 0% to in excess of 35% in various jurisdictions in which it conducts business. In addition, the Company typically generates a substantial portion of its income in the fourth quarter of each fiscal year. Geographical shifts in income from previous quarters’ projections caused by factors including, but not limited to, changes in volume and product mix and fluctuations in foreign currency translation rates, could therefore have potentially significant favorable or unfavorable effects on the Company’s income tax expense, effective tax rate and results of operations. Governments in the jurisdictions in which the Company operates implement changes to tax laws and regulations from time to time. Any changes in corporate income tax rates or regulations regarding transfer pricing or repatriation of dividends or capital, as well as changes in the interpretation of existing tax laws and regulations, in the jurisdictions in which the Company operates could adversely affect the Company’s cash flow and lead to increases in its overall tax burden, which would negatively affect the Company’s profitability. On December 22, 2017, the U.S. enacted legislation informally referred to as the Tax Cuts and Jobs Act (the “2017 Tax Act”). The 2017 Tax Act changed the U.S. tax system to a territorial tax system, including base broadening measures on non-U.S. earnings, whereby historical unremitted, earnings of foreign subsidiaries are deemed to have been repatriated to the U.S. in 2017 regardless of when the assets are actually remitted to the U.S., as well as reducing or eliminating certain domestic deductions and credits and limiting the deductibility of interest expense and executive compensation. Earnings deemed to have been distributed to the U.S. in accordance with the aforementioned 2017 Tax Act deemed distribution rules are subject to a Transition Toll Tax (“Transition Tax”), which is a one-time, mandatory deemed repatriation tax on the accumulated foreign earnings that have not been previously taxed. To the extent those earnings are deemed to have been invested in cash and cash equivalents, they will be taxed at a rate of 15.5%; the remainder of those earnings will be taxed at a rate of 8.0%. As a result, the Company’s historical unremitted foreign earnings were deemed repatriated in 2017 and the Company incurred a $550 million estimated tax provision, which primarily consisted of an estimated Transition Tax, as well as estimated income tax provisions for state and withholding taxes and a provision associated with the remeasurement of the Company’s deferred tax assets and liabilities from 35% to the new U.S. corporate income tax rate of 21%. The Transition Tax will be paid over an eight-year period, starting in 2018, and will not accrue interest. The final impact of the 2017 Tax Act may differ from these estimates, due to, among other things, changes in interpretations, analysis and assumptions made by the Company, additional guidance that may be issued by the U.S. Department of the Treasury and tax planning actions that the Company may undertake. The Company continues to be permanently reinvested in relation to the cumulative historical outside basis difference that is not related to the unremitted earnings that were taxed. We will continue to evaluate our assertions, including intentions and plans, on the cumulative historical outside basis differences, not related to the unremitted earnings that were taxed, in our foreign subsidiaries as of December 31, 2017. In accordance with authoritative guidance issued by the SEC, we expect to finalize our analysis and accounting related to the toll charge, deferred tax assets and liabilities and any remaining outside basis differences in our foreign subsidiaries during the measurement period; however, there can be no assurance given that these amounts will not need to be revised in the future, affecting the future financial condition and results of operations of the Company. Going forward, the Company estimates that its effective tax rate will increase approximately one to three percentage points in the future; however, there can be no assurance given that the estimated future effective income tax rate increase will not be different and there can be no assurances that it will not have a material impact on the Company’s results of operations or financial condition. The Company has a contractual tax rate in Singapore of 0% through March 2021, based upon the achievement and continued satisfaction of certain operational and financial milestones, which the Company expects to continue to meet. Currently, the Company has determined that it is more likely than not to realize the contractual tax rate in Singapore of 0% and has not recognized any uncertain tax benefit in its balance sheet related to the achievement of the contractual milestones in Singapore. In the event that it appears that the milestone targets will not be met, the Company will no longer be entitled to a 0% contractual tax rate benefit on income earned in Singapore dating back to the start date of the agreement (April 1, 2016), at which time all tax benefits previously recorded would be reversed and an income tax charge equal to the statutory tax of 17% on income earned during that period would be recorded. As a global business, the Company is subject to tax audit examinations in various jurisdictions throughout the world. The Company must manage the cost and disruption of responding to governmental audits, investigation and proceedings, whether or not they have merit. In addition, the impact of the settlement of pending or future tax audit examination could have an unfavorable effect on the Company’s income tax expense, effective tax rate and results of operations. The Company’s financial condition and results of operations could be adversely affected if the Company is unable to maintain a sufficient level of cash flow. The Company had $1,998 million in debt and $3,394 million in cash, cash equivalents and investments as of December 31, 2017. As of December 31, 2017, the Company also had the ability to borrow an additional $498 million from its existing, committed credit facility. All but a small portion of the Company’s debt was in the U.S. There is a substantial cash requirement in the U.S. to fund operations and capital expenditures, service debt interest obligations, finance potential U.S. acquisitions and continue authorized stock repurchase programs in the U.S. A majority of the Company’s cash is generated from foreign operations, with $3,326 million of the Company’s cash, cash equivalents and investments held by foreign subsidiaries. At December 31, 2017, the Company’s cash, cash equivalents and investments generated from foreign subsidiaries have effectively been repatriated to the U.S., providing the Company with the ability to access the cash, cash equivalents and investments to satisfy U.S. cash requirements; however, the Company’s financial condition and results of operations could still be adversely impacted if the Company is unable to maintain a sufficient level of cash flow to address these requirements through (1) cash from operations, (2) the Company’s ability to access its existing cash and revolving credit facility, (3) the ability to expand the Company’s borrowing capacity and (4) other sources of capital obtained at an acceptable cost. Debt covenants, and the Company’s failure to comply with them, could negatively impact the Company’s capital and financial results. The Company’s debt is subject to restrictive debt covenants that limit the Company’s ability to engage in certain activities that could otherwise benefit the Company. These debt covenants include restrictions on the Company’s ability to enter into certain contracts or agreements, which may limit the Company’s ability to make dividend or other payments, secure other indebtedness, enter into transactions with affiliates and consolidate, merge or transfer all or substantially all of the Company’s assets. The Company is also required to meet specified financial ratios under the terms of the Company’s debt agreements. The Company’s ability to comply with these financial restrictions and all other covenants is dependent on the Company’s future performance, which is subject to, but not limited to, prevailing economic conditions and other factors, including factors that are beyond the Company’s control, such as foreign exchange rates, interest rates, changes in technology and changes in the level of competition. As of December 31, 2017, the Company was in compliance with all debt covenants. Disruption, cyber attack or unforeseen problems with the security, maintenance or upgrade of the Company’s information and web-based systems could have an adverse effect on the Company’s operations and financial condition. The Company relies on its technology infrastructure and that of its software and banking partners, among other functions, to interact with suppliers, sell products and services, fulfill contract obligations, ship products, collect and make electronic wire and check based payments and otherwise conduct business. The Company’s technology infrastructure may be vulnerable to damage or interruption from, but not limited to, natural disasters, power loss, telecommunication failures, terrorist attacks, computer viruses, unauthorized access to customer or employee data, unauthorized access to and funds transfers from Company bank accounts and other attempts to harm the Company’s systems. Any prolonged disruption to the Company’s technology infrastructure, at any of its facilities, could have a material adverse effect on the Company’s results of operations or financial condition. If the Company’s security measures are compromised or fail to adequately protect its technology infrastructure, research and development efforts or manufacturing operations, the Company’s products and services may be perceived as vulnerable or unreliable, the information the Company’s controls and processes may be subject to unauthorized access, acquisition or modification, the Company’s brand and reputation could be damaged, the services that the Company provides to its customers could be disrupted, and customers may stop using the Company’s products and services, all of which could reduce the Company’s revenue and earnings, increase its expenses and expose the Company to legal claims and regulatory actions. The Company is in the business of designing, manufacturing, selling and servicing analytical instruments to life science, pharmaceutical, biochemical, industrial, nutritional safety, and environmental, academic and governmental customers working in research and development, quality assurance and other laboratory applications, and the Company is also a developer and supplier of software-based products that support instrument systems. Many of the Company’s customers are in highly regulated industries. While the Company has invested time and resources implementing measures designed to protect the integrity and security of its technology infrastructure, research and development processes, manufacturing operations, products and services, and the internal and external data managed by the Company, there is a risk these measures will be defeated or compromised or that they are otherwise insufficient to protect against existing or emerging threats. The Company also has acquired companies, products, services and technologies over time and may inherit risk when integrating these acquisitions into the Company. In addition, at times, the Company faces attempts by third parties to defeat its security measures or exploit vulnerabilities in its systems. These risks will increase as the Company continues to grow and expand geographically, and its systems, products and services become increasingly digital and sensor- and web-based. The Company could suffer significant damage to its brand and reputation if a security incident resulted in unauthorized access to, acquisition of, or modification to the Company’s technology infrastructure, research and development processes, manufacturing operations, its products and services as well as the internal and external data managed by the Company. Such an incident could disrupt the Company’s operations and customers could lose confidence in the Company’s ability to deliver quality and reliable products or services. This could negatively impact sales and could increase costs related to fixing and addressing these incidents and any vulnerabilities exposed by them, as well as to lawsuits, regulatory investigations, claims or legal liability including contractual liability, costs and expenses owed to customers and business partners. Compliance failures could harm the Company’s business. The Company is subject to regulation by various federal, state and foreign governments and agencies in areas including, among others, health and safety, import/export, privacy and data protection, FCPA and environmental laws and regulations. A portion of the Company’s operations are subject to regulation by the FDA and similar foreign regulatory agencies. These regulations are complex and govern an array of product activities, including design, development, labeling, manufacturing, promotion, sales and distribution. Any failure by the Company to comply with applicable governmental regulations could result in product recalls, the imposition of fines, restrictions on the Company’s ability to conduct or expand its operations or the cessation of all or a portion of its operations. Regulators globally are increasingly imposing greater fines and penalties for privacy and data protection violations, and the European Union has enacted a broad data protection regulation with fines based on a percentage of global revenues. Changes in laws or regulations associated with enhanced protection of certain sensitive types of personal information, such as information related to health, could greatly increase the cost of compliance and the cost of providing the Company’s products or services. Any failure, or perceived failure, by the Company to comply with laws and regulations on privacy, data security or consumer protection, or other policies, public perception, standards, self-regulatory requirements or legal obligations, could result in lost or restricted business, proceedings, actions or fines brought against the Company or levied by governmental entities or others, or could otherwise adversely affect the business and harm the Company’s reputation. Some of the Company’s operations are subject to domestic and international laws and regulations with respect to the manufacturing, handling, use or sale of toxic or hazardous substances. This requires the Company to devote substantial resources to maintain compliance with those applicable laws and regulations. If the Company fails to comply with such requirements in the manufacturing or distribution of its products, it could face civil and/or criminal penalties and potentially be prohibited from distributing or selling such products until they are compliant. Some of the Company’s products are also subject to the rules of certain industrial standards bodies, such as the International Standards Organization. The Company must comply with these rules, as well as those of other agencies, such as the United States Occupational Safety and Health Administration. Failure to comply with such rules could result in the loss of certification and/or the imposition of fines and penalties, which could have a material adverse effect on the Company’s operations. As a publicly-traded company, the Company is subject to the rules of the SEC and the New York Stock Exchange. In addition, the Company must comply with the Sarbanes-Oxley rules, which require the Company to establish and maintain adequate internal control over financial reporting. The Company’s efforts to comply with such laws and regulations are time consuming and costly. While we continue to enhance our controls, we cannot be certain that we will be able to prevent future significant deficiencies or material weaknesses. Failure to comply with such rules or having inadequate internal controls could have a material adverse effect on the Company’s financial condition and operations, which could cause investors to lose confidence in our reported financial information and could have a negative effect on the trading price of our stock and our access to capital. The Company is subject to the rules of the SEC under the Dodd-Frank Wall Street Reform and Consumer Protection Act, requiring disclosure as to whether certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which may be contained in the Company’s products, are mined from the Democratic Republic of the Congo and adjoining countries. In 2016, the Company was not able to determine with certainty the country of origin of some of the conflict minerals in its manufactured products. However, the Company does not have knowledge that any of its conflict minerals originated from the Democratic Republic of the Congo or adjoining countries. The Company is in the process of evaluating its 2017 supply chain, and the Company plans to file its 2017 Form SD with the SEC in May 2018. The results of this and future evaluations may impose additional costs and may introduce new risks related to the Company’s ability to verify the origin of any conflict minerals contained in its products. The Company’s financial condition and results of operations could be adversely affected by changes to the Company’s retirement plans or retirement plan assets. The Company sponsors various retirement plans, both inside and outside the U.S. Any changes in regulations made by governments in countries in which the Company sponsors retirement plans could adversely impact the Company’s cash flows or results of operations. In connection with these retirement plans, the Company is exposed to market risks associated with changes in the various capital markets. For example, changes in long-term interest rates affect the discount rate that is used to measure the Company’s retirement plan obligations and related expense. In addition, changes in the market value of investments held by the retirement plans could materially impact the funded status of the retirement plans, and affect the related pension expense and level and timing of contributions required under applicable laws. Estimates and assumptions made in accounting for the Company’s results from operations are dependent on future results, which involve significant judgments and may be imprecise and may differ materially from actual results. The preparation of consolidated financial statements in conformity with generally accepted accounting principles requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent liabilities at the dates of the financial statements. These estimates and assumptions must be made due to certain information used in preparation of our financial statements which is dependent on future events, cannot be calculated with a high degree of precision from data available or is not capable of being readily calculated based on generally accepted methodologies. The Company believes that the accounting related to revenue recognition, product returns and allowances, bad debts, inventory valuation, goodwill and intangible assets, income taxes, warranty and installation provisions, litigation, retirement plan obligations, stock-based compensation, equity investments, business combinations and asset acquisitions, uncertain tax positions and contingencies involves significant judgments and estimates. Actual results for all estimates could differ materially from the estimates and assumptions used, which could have a material adverse effect on our financial condition and results of operations. The effects of climate change could harm the Company’s business. The Company’s manufacturing processes for certain of its products involve the use of chemicals and other substances that are regulated under various international, federal, state and local laws governing the environment. In the event that any future climate change legislation would require that stricter standards be imposed by domestic or international environmental regulatory authorities with respect to the use and/or levels of possible emissions from such chemicals and/or other substances, the Company may be required to make certain changes and adaptations to its manufacturing processes. Any such changes could have a material adverse effect on the financial statements of the Company. Another potential effect of climate change is an increase in the severity of global weather conditions. The Company’s manufacturing facilities are located in the United States, United Kingdom, Ireland and Germany. In addition, the Company manufactures a growing percentage of its HPLC, UPLC and MS products in both Singapore and Ireland. Severe weather and geological conditions or events, including earthquakes, hurricanes and/or tsunamis, could potentially cause significant damage to the Company’s manufacturing facilities in each of these countries. The effects of such damage and the resulting disruption of manufacturing operations and the impact of lost sales could have a material adverse impact on the financial results of the Company. Item 1B: