CMI, §1A diff (2019 → 2020)

ITEM 1A. Risk Factors Set forth below and elsewhere in this Annual Report on Form 10-K are some of the principal risks and uncertainties that could cause our actual business results to differ materially from any forward-looking statements contained in this Report and could individually, or in combination, have a material adverse effect on our results of operations, financial position and cash flows. These risk factors should be considered in addition to our cautionary comments concerning forward-looking statements in this Report, including statements related to markets for our products and trends in our business that involve a number of risks and uncertainties. Our separate section above, "CAUTIONARY STATEMENTS REGARDING FORWARD-LOOKING INFORMATION," should be considered in addition to the following statements. GOVERNMENT REGULATION We are conducting a formal internal review of our emission certification process and compliance with emission standards with respect to our pick-up truck applications and are working with the EPA and CARB to address their questions about these applications. The results of this formal review and regulatory processes, or the discovery of any noncompliance issues, could have a material adverse impact on our results of operations and cash flows. We previously announced that we are conducting a formal internal review of our emissions certification process and compliance with emission standards with respect to all of our pick-up truck applications, following conversations with the EPA and CARB regarding certification of our engines for model year 2019 RAM 2500 and 3500 trucks. During conversations with the EPA and CARB about the effectiveness of our pick-up truck applications, the regulators raised concerns that certain aspects of our emissions systems may reduce the effectiveness of our emissions control systems and thereby act as defeat devices. As a result, our internal review focuses, in part, on the regulators’ concerns. We are working closely with the regulators to enhance our emissions systems to improve the effectiveness of all of our pick-up truck applications and to fully address the regulators’ requirements. Based on discussions with the regulators, we have developed a new calibration for the engines in model year 2019 RAM 2500 and 3500 trucks that has been included in all engines shipped since September 2019. During our discussions, the regulators have asked us to look at other model years and other engines. We will continue to work together closely with the relevant regulators to develop and implement recommendations for improvement as part of our ongoing commitment to compliance. Due to the continuing nature of the formal review, our ongoing cooperation with the regulators and the presence of many unknown facts and circumstances, we are not yet able to estimate the financial impact of these matters. It is possible that the consequences of any remediation plans resulting from our formal review and these regulatory processes could have a material adverse impact on our results of operations and cash flows in the periods in which these emissions certification issues are addressed. Our products are subject to extensive statutory and regulatory requirements that can significantly increase our costs and, along with increased scrutiny from regulatory agencies and unpredictability in the adoption, implementation and enforcement of increasingly stringent and fragmented emission standards by multiple jurisdictions around the world, could have a material adverse impact on our results of operations, financial condition and cash flows. Our engines are subject to extensive statutory and regulatory requirements governing emissions and noise, including standards imposed by the EPA, the EU, state regulatory agencies (such as the CARB) and other regulatory agencies around the world. Regulatory agencies are making certification and compliance with emissions and noise standards more stringent and subjecting diesel engine products to an increasing level of scrutiny. The discovery of noncompliance issues could have a material adverse impact on our results of operations, financial condition and cash flows. Developing engines and components to meet more stringent and changing regulatory requirements, with different implementation timelines and emission requirements, makes developing engines efficiently for multiple markets complicated and could result in substantial additional costs that may be difficult to recover in certain markets. While we have met previous deadlines, our ability to comply with existing and future regulatory standards will be essential for us to maintain our competitive position in the engine applications and industries we serve. The successful development and introduction of new and enhanced products in order to comply with new regulatory requirements are subject to other risks, such as delays in product development, cost over-runs and unanticipated technical and manufacturing difficulties. In addition to these risks, the nature and timing of government implementation and enforcement of increasingly stringent emission standards in our worldwide markets are unpredictable and subject to change. Any delays in implementation or enforcement could result in a loss of our competitive advantage and could have a material adverse impact on our results of operations, financial condition and cash flows. We operate our business on a global basis and policy changes affecting international trade could adversely impact the demand for our products and our competitive position. We manufacture, sell and service products globally and rely upon a global supply chain to deliver the raw materials, components, systems and parts that we need to manufacture and service our products. Changes in government policies on foreign trade and investment can affect the demand for our products and services, cause non-U.S. customers to shift preferences toward domestically manufactured or branded products and impact the competitive position of our products or prevent us from being able to sell products in certain countries. Our business benefits from free trade agreements, such as the new United States-Mexico-Canada Agreement and the U.S. trade relationship with China, Brazil and France and efforts to withdraw from, or substantially modify such agreements or arrangements, in addition to the implementation of more restrictive trade policies, such as more detailed inspections, higher tariffs (including, but not limited to, additional tariffs on the import of steel or aluminum), import or export licensing requirements, exchange controls or new barriers to entry, could adversely impact our production costs, customer demand and our relationships with customers and suppliers. Any of these consequences could have a material adverse effect on our results of operations, financial condition and cash flows. The U.K.’s exit from the European Union (EU) could materially and adversely impact our results of operations, financial condition and cash flows. On January 31, 2020, the U.K. exited from the EU (BREXIT). Additionally, the results of the U.K.’s BREXIT caused, and may continue to cause, volatility in global stock markets, currency exchange rate fluctuations and global economic uncertainty. Although it is unknown what the terms of the U.K.’s future relationship with the EU will be, it is possible that there will be higher tariffs or greater restrictions on imports and exports between the U.K. and the EU and increased regulatory complexities. The effects of BREXIT will depend on any agreements the U.K. makes to retain access to EU markets either during a transitional period or on a permanent basis. These measures could potentially disrupt our supply chain, including delays of imports and exports, limited access to human capital within some of the target markets and jurisdictions in which we operate and adverse changes to tax benefits or liabilities in these or other jurisdictions. In addition, BREXIT could lead to legal uncertainty and potentially divergent national laws and regulations, including with respect to emissions and similar certifications granted to us by the EU, as the U.K. determines which EU laws to replace or replicate. Any of these effects of BREXIT, among others, could have a material adverse impact on our results of operations, financial condition and cash flows. Unanticipated changes in our effective tax rate, the adoption of new tax legislation or exposure to additional income tax liabilities could adversely affect our profitability. We are subject to income taxes in the U.S. and numerous international jurisdictions. Our income tax provision and cash tax liability in the future could be adversely affected by changes in earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws and the discovery of new information in the course of our tax return preparation process. The carrying value of deferred tax assets, which are predominantly in the U.S., is dependent on our ability to generate future taxable income in the U.S. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly judgmental. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes against us. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision. The amounts ultimately paid upon resolution of these or subsequent tax audits could be materially different from the amounts previously included in our income tax provision and, therefore, could have a material impact on our tax provision. Our global operations are subject to laws and regulations that impose significant compliance costs and create reputational and legal risk. Due to the international scope of our operations, we are subject to a complex system of commercial and trade regulations around the world. Recent years have seen an increase in the development and enforcement of laws regarding trade compliance and anti-corruption, such as the U.S. Foreign Corrupt Practices Act and similar laws from other countries, as well as new regulatory requirements regarding data privacy, such as the European Union General Data Protection Regulation. Our numerous foreign subsidiaries, affiliates and joint venture partners are governed by laws, rules and business practices that differ from those of the U.S. The activities of these entities may not comply with U.S. laws or business practices or our Code of Business Conduct. Violations of these laws may result in severe criminal or civil sanctions, could disrupt our business and result in an adverse effect on our reputation, business and results of operations, financial condition and cash flows. We cannot predict the nature, scope or effect of future regulatory requirements to which our operations might be subject or the manner in which existing laws might be administered or interpreted. Our operations are subject to increasingly stringent environmental laws and regulations. Our plants and operations are subject to increasingly stringent environmental laws and regulations in all of the countries in which we operate, including laws and regulations governing air emission, discharges to water and the generation, handling, storage, transportation, treatment and disposal of waste materials. While we believe that we are in compliance in all material respects with these environmental laws and regulations, there can be no assurance that we will not be adversely impacted by costs, liabilities or claims with respect to existing or subsequently acquired operations, under either present laws and regulations or those that may be adopted or imposed in the future. We are also subject to laws requiring the cleanup of contaminated property. If a release of hazardous substances occurs at or from any of our current or former properties or at a landfill or another location where we have disposed of hazardous materials, we may be held liable for the contamination and the amount of such liability could be material. Future bans or limitations on the use of diesel-powered vehicles or other applications could have a material adverse impact on our business over the long term. In an effort to limit greenhouse gas emissions and combat climate change, multiple countries and cities have announced that they plan to implement a ban on the use in their countries or cities of diesel-powered products in the near or distant future. These countries include China, India and Germany. In addition, California government officials have called for the state to phase out sales of diesel-powered certain vehicles by 2035. To the extent that these types of bans are actually implemented in the future on a broad basis, or in one or more of our key markets, our diesel business over the long-term could experience material adverse impacts. BUSINESS CONDITIONS / DISRUPTIONS We are vulnerable to supply shortages from single-sourced suppliers, including suppliers that may be impacted by the COVID-19 pandemic, and any delay in receiving critical supplies could have a material adverse effect on our results of operations, financial condition and cash flows. We single source a significant number of parts and raw materials critical to our business operations. Any delay in our suppliers' deliveries may adversely affect our operations at multiple manufacturing locations, forcing us to seek alternative supply sources to avoid serious disruptions. Delays may be caused by factors affecting our suppliers (including the COVID-19 pandemic, capacity constraints, port congestion, labor disputes, economic downturns, availability of credit or impaired financial condition), suppliers' allocations to other purchasers, weather emergencies, natural disasters, acts of government or acts of war or terrorism. In particular, if the COVID-19 pandemic continues and results in extended periods of travel, commercial and other restrictions, we could continue to incur global supply disruptions. Any extended delay in receiving critical supplies could impair our ability to deliver products to our customers and have a material adverse effect on our results of operations, financial condition and cash flows. A sustained market slowdown due to the impacts from the COVID-19 pandemic, other public health crises, epidemics or pandemics or otherwise, could have a material and adverse effect on our results of operations, financial condition and cash flows. The COVID-19 pandemic triggered a significant downturn in our markets globally and these challenging market conditions could continue for an extended period of time. Most global economies slowed and there is still much uncertainty as to when these global markets will fully recover. If any or all of these major markets were to endure a sustained slowdown or recession due to the impacts of the COVID-19 pandemic, other public health crises, epidemics or pandemics or otherwise decline, it could have a material adverse effect on our results of operations, financial condition and cash flows. Our manufacturing and supply chain abilities may be materially and adversely impacted by an extended shutdown or disruption of our operations due to the COVID-19 pandemic which could materially and adversely affect our results of operations, financial condition and cash flows. The outbreak of COVID-19 spread throughout the world and became a global pandemic with the resultant economic impacts evolving into a worldwide recession. The pandemic triggered a significant downturn in our markets globally, which continued to unfavorably impact market conditions throughout 2020 and these challenging market conditions could continue for an extended period of time. In an effort to contain the spread of COVID-19, maintain the well-being of our employees and stakeholders, match the reduced demand from our customers and in accordance with governmental requirements, we closed or partially shut down certain office, manufacturing, distribution and technical center facilities around the world in March 2020. Although most of our manufacturing, distribution and technical center facilities re-opened early in the second quarter of 2020, some operated at reduced capacities, most of our global office buildings remained closed through the remainder of 2020. Despite many of our markets recovering in the second half of 2020, the ongoing spread of the virus prior to widespread vaccination presents several risks to our business, especially in the first half of 2021. While the impacts of the pandemic and the resulting global recession are expected to be temporary, the duration of the production and supply chain disruptions, and related financial impacts, cannot be estimated at this time. Should the reduced manufacturing and distribution capacities continue for an extended period of time or worsen, the impact on our production and supply chain could have a material adverse effect on our results of operations, financial condition and cash flows. We face the challenge of accurately aligning our capacity with our demand. Our markets are cyclical in nature and we face periods when demand fluctuates significantly higher or lower than our normal operating levels, including COVID-19 related shut-downs. Accurately forecasting our expected volumes and appropriately adjusting our capacity are important factors in determining our results of operations and cash flows. We manage our capacity by adjusting our manufacturing workforce, capital expenditures and purchases from suppliers. In periods of weak demand we may face under-utilized capacity and un-recovered overhead costs, while in periods of strong demand we may experience unplanned costs and could fail to meet customer demand. We cannot guarantee that we will be able to adequately adjust our manufacturing capacity in response to significant changes in customer demand, which could harm our business. In addition, the COVID-19 pandemic and related reductions in demand forced certain of our customer’s facilities around the world to close or partially shut down operations, inhibiting our ability to forecast demand and caused related closures and partial shut-downs of certain of our manufacturing facilities. If we do not accurately align our manufacturing capabilities with demand it could have a material adverse effect on our results of operations, financial condition and cash flows. Our truck manufacturers and OEM customers discontinuing outsourcing their engine supply needs, financial distress, particularly related to the COVID-19 pandemic or bankruptcy, or a change-in-control of one of our large truck OEM customers could have a material adverse impact on our results of operations, financial condition and cash flows. We recognize significant sales of engines and components to a few large on-highway truck OEM customers which have been an integral part of our positive business results for several years. Many are truck manufacturers or OEMs that manufacture engines for some of their own vehicles. Despite their own engine manufacturing abilities, these customers have historically chosen to outsource certain types of engine production to us due to the quality of our engine products, our emission compliance capabilities, our systems integration, their customers' preferences, their desire for cost reductions, their desire for eliminating production risks and their desire to maintain company focus. However, there can be no assurance that these customers will continue to outsource, or outsource as much of, their engine production in the future. In addition, increased levels of OEM vertical integration could result from a number of factors, such as shifts in our customers' business strategies, acquisition by a customer of another engine manufacturer, the inability of third-party suppliers to meet product specifications and the emergence of low-cost production opportunities in foreign countries. Any significant reduction in the level of engine production outsourcing from our truck manufacturer or OEM customers, financial distress of one of our large truck OEM customers due to the COVID-19 pandemic or bankruptcy or a change-in-control, could likely lead to significant reductions in our sales volumes, commercial disputes, receivable collection issues, and other negative consequences that could have a material adverse impact on our results of operations, financial condition and cash flows. A slowdown in infrastructure development and/or depressed commodity prices could adversely affect our business. Infrastructure development and strong commodity prices have been significant drivers of our historical growth, but as the pace of investment in infrastructure slowed in recent years (especially in China and Brazil), commodity prices were significantly lower and demand for our products in off-highway markets was weak. Weakness in commodity prices, including any negative impacts on commodity prices such as oil, gas and coal, adversely impacted mining industry participants’ demand for vehicles and equipment that contain our engines and other products over the past several years. Continued deterioration in infrastructure and commodities markets, including the impacts from COVID-19, could adversely affect our customers’ demand for vehicles and equipment and, as a result, could adversely affect our business. We may fail to realize all of the expected enhanced revenue, earnings and cash flow from our investment in the Eaton Cummins Automated Transmission Technologies joint venture. A significant component of our investment in the Eaton Cummins Automated Transmission Technologies joint venture related to the expected growth in automated transmission products in North America and China. While we believe we will ultimately achieve these objectives, it is possible that we will be unable to achieve our original expectations within our anticipated time frame or in the anticipated amounts. As part of the purchase accounting associated with the formation of the joint venture, significant goodwill and intangible asset balances were recorded on the consolidated balance sheet. If cash flows from the joint venture fall short of our anticipated amounts, these assets could be subject to non-cash impairment charges, negatively impacting our earnings. We derive significant earnings from investees that we do not directly control, with more than 50 percent of these earnings from our China-based investees. For 2020, we recognized $452 million of equity, royalty and interest income from investees, compared to $330 million in 2019. Approximately half of our equity, royalty and interest income from investees is from four of our 50 percent owned joint ventures in China - Beijing Foton Cummins Engine Co., Ltd., Dongfeng Cummins Engine Company, Ltd., Chongqing Cummins Engine Company, Ltd. and Dongfeng Cummins Emission Solutions Co. Ltd. Although a significant percentage of our net income is derived from these unconsolidated entities, we do not unilaterally control their management or their operations, which puts a substantial portion of our net income at risk from the actions or inactions of these entities. A significant reduction in the level of contribution by these entities to our net income would likely have a material adverse effect on our results of operations and cash flows. PRODUCTS AND TECHNOLOGY Our products are subject to recall for performance or safety-related issues. Our products are subject to recall for performance or safety-related issues. Product recalls subject us to reputational risk, loss of current and future customers, reduced revenue and product recall costs. Product recall costs are incurred when we decide, either voluntarily or involuntarily, to recall a product through a formal campaign to solicit the return of specific products due to known or suspected performance or safety issues. Any significant product recalls could have material adverse effects on our results of operations, financial condition and cash flows. See Note 12, "PRODUCT WARRANTY LIABILITY" to the Consolidated Financial Statements for additional information. The development of new technologies may materially reduce the demand for our current products and services. We are investing in new products and technologies, including electrified powertrains, hydrogen production and fuel cells, for planned introduction into certain new and existing markets. Given the early stages of development of some of these new products and technologies, there can be no guarantee of the future market acceptance and investment returns with respect to our planned products, which will face competition from an array of other technologies and manufacturers. The increased adoption of electrified powertrains in some market segments could result in lower demand for current diesel or natural gas engines and components and, over time, reduce the demand for related parts and service revenues from diesel or natural gas powertrains. Furthermore, it is possible that we may not be successful in developing segment-leading electrified or alternate fuel powertrains and some of our existing customers could choose to develop their own, or source from other manufacturers, and any of these factors could have a material adverse impact on our results of operations, financial condition and cash flows. Lower-than-anticipated market acceptance of our new or existing products or services could have a material adverse impact on our results of operations, financial condition and cash flows. Although we conduct market research before launching new or refreshed engines and introducing new services, many factors both within and outside our control affect the success of new or existing products and services in the marketplace. Offering engines and services that customers desire and value can mitigate the risks of increasing competition and declining demand, but products and services that are perceived to be less than desirable (whether in terms of price, quality, overall value, fuel efficiency or other attributes) can exacerbate these risks. With increased consumer interconnectedness through the internet, social media and other media, mere allegations relating to poor quality, safety, fuel efficiency, corporate responsibility or other key attributes can negatively impact our reputation or market acceptance of our products or services, even if such allegations prove to be inaccurate or unfounded. Our products are exposed to variability in material and commodity costs. Our businesses establish prices with our customers in accordance with contractual time frames; however, the timing of material and commodity market price increases may prevent us from passing these additional costs on to our customers through timely pricing actions. Additionally, higher material and commodity costs around the world may offset our efforts to reduce our cost structure. While we customarily enter into financial transactions and contractual pricing adjustment provisions with our customers that attempt to address some of these risks (notably with respect to copper, platinum and palladium), there can be no assurance that commodity price fluctuations will not adversely affect our results of operations and cash flows. In addition, while the use of commodity price hedging instruments and contractual pricing adjustments may provide us with some protection from adverse fluctuations in commodity prices, by utilizing these instruments, we potentially forego the benefits that might result from favorable fluctuations in price. As a result, higher material and commodity costs, as well as hedging these commodity costs during periods of decreasing prices, could result in declining margins. Our business is exposed to potential product liability claims. We face an inherent business risk of exposure to product liability claims in the event that our products' failure to perform to specification results, or is alleged to result, in property damage, bodily injury and/or death. At any given time, we are subject to various and multiple product liability claims, any one of which, if decided adversely to us, may have a material adverse effect on our reported results of operation in the period in which our liability with respect to any such claim is recognized. While we maintain insurance coverage with respect to certain product liability claims, we may not be able to obtain such insurance on acceptable terms in the future, if at all, and any such insurance may not provide adequate coverage against product liability claims. In addition, product liability claims can be expensive to defend and can divert the attention of management and other personnel for significant periods of time, regardless of the ultimate outcome. Furthermore, even if we are successful in defending against a claim relating to our products, claims of this nature could cause our customers to lose confidence in our products and us. GENERAL The COVID-19 pandemic created disruptions and turmoil in global credit and financial markets and ongoing impacts could have a material adverse effect on our results of operations, financial condition and cash flows. The COVID-19 pandemic created disruptions and turmoil in the global credit and financial markets and made it more difficult and costly for us to access capital on favorable terms to meet our liquidity needs. The disruptions to the global credit and financial markets could also have material negative impacts on business operations and financial positions of our customers and suppliers, which may negatively impact our orders, sales and supply chain. If the impacts of the COVID-19 pandemic on global credit and financial markets continue, or worsen, it could negatively impact our business, along with the financial condition of our customers and suppliers, and it could have a material adverse impact on our results of operations, financial condition and cash flows. We may be adversely impacted by work stoppages and other labor matters. At December 31, 2020, we employed approximately 57,825 persons worldwide. Approximately 20,279 of our employees worldwide were represented by various unions under collective bargaining agreements that expire between 2021 and 2025. While we have no reason to believe that we will be materially impacted by work stoppages or other labor matters, there can be no assurance that future issues with our labor unions will be resolved favorably or that we will not encounter future strikes, work stoppages, or other types of conflicts with labor unions or our employees. Any of these consequences may have an adverse effect on us or may limit our flexibility in dealing with our workforce. In addition, many of our customers and suppliers have unionized work forces. Work stoppages or slowdowns experienced by us, our customers or suppliers, including any work stoppages or slowdowns related to the COVID-19 pandemic, could result in slowdowns or closures that would have a material adverse effect on our results of operations, financial condition and cash flow. We rely on our executive leadership team and other key personnel as a critical part of our human capital resources. We depend on the skills, institutional knowledge, working relationships, and continued services and contributions of key personnel, including our executive leadership team as a critical part of our human capital resources. In addition, our ability to achieve our operating and strategic goals depends on our ability to identify, hire, train and retain qualified individuals. We compete with other companies both within and outside of our industry for talented personnel and we may lose key personnel or fail to attract, train and retain other talented personnel. Any such loss or failure could have material adverse effects on our results of operations, financial condition and cash flows. In particular, our continued success will depend in part on our ability to retain the talents and dedication of key employees. If key employees terminate their employment or become ill as a result of the COVID-19 pandemic or otherwise, our business activities may be adversely affected and our management team’s attention may be diverted. In addition, we may not be able to locate suitable replacements for any key employees who leave. We may be adversely impacted by the effects of climate change and may incur increased costs and experience other impacts due to new or more stringent greenhouse gas regulations designed to address climate change. The scientific consensus indicates that emissions of greenhouse gases (GHG) continue to alter the composition of Earth’s atmosphere in ways that are affecting, and are expected to continue to affect, the global climate. The potential impacts of climate change on our customers, product offerings, operations, facilities and suppliers are accelerating and uncertain, as they will be particular to local and customer-specific circumstances. These potential impacts may include, among other items, physical long-term changes in freshwater availability and the frequency and severity of weather events as well as customer product changes either through preference or regulation. Concerns regarding climate change may lead to additional international, national, regional and local legislative and regulatory responses. Various stakeholders, including legislators and regulators, shareholders and non-governmental organizations, are continuing to look for ways to reduce GHG emissions. We could face risks to our brand reputation, investor confidence and market share due to an inability to innovate and develop new products that decrease GHG emissions. Increased input costs, such as fuel and electricity, and compliance-related costs could also impact customer operations and demand for our products. As the impact of any future GHG legislative or regulatory requirements on our global businesses and products is dependent on the timing, scope and design of the mandates or standards, we are currently unable to predict its potential impact which could have a material adverse effect on our results of operations, financial condition and cash flows. The regulation of GHG emissions could also increase our operating costs through higher utility, transportation and materials costs. Our plan to reposition our portfolio of product offerings through exploration of strategic acquisitions and divestitures may expose us to additional costs and risks. Part of our strategic plan is to improve our revenue growth, gross margins and earnings by exploring the repositioning of our portfolio of product line offerings through the pursuit of potential strategic acquisitions and/or divestitures to provide future strategic, financial and operational benefits and improve shareholder value. There can be no assurance that we will be able to identify suitable candidates or consummate these transactions on favorable terms. The successful identification and completion of any strategic transaction depends on a number of factors that are not entirely within our control, including the availability of suitable candidates and our ability to negotiate terms acceptable to all parties involved, conclude satisfactory agreements and obtain all necessary regulatory approvals. Accordingly, we may not be able to successfully negotiate and complete specific transactions. The exploration, negotiation and consummation of strategic transactions may involve significant expenditures by us, which may adversely affect our results of operations at the time such expenses are incurred, and may divert management’s attention from our existing business. Strategic transactions also may have adverse effects on our existing business relationships with suppliers and customers. If required, the financing for strategic acquisitions could result in an increase in our indebtedness, dilute the interests of our shareholders or both. Any acquisition may not be accretive to us for a significant period of time following the completion of such acquisition. Also, our ability to effectively integrate any potential acquisition into our existing business and culture may not be successful, which could jeopardize future financial and operational performance for the combined businesses. In addition, if an acquisition results in any additional goodwill or increase in other intangible assets on our balance sheet and subsequently becomes impaired, we would be required to record a non-cash impairment charge, which could result in a material adverse effect on our financial condition. Similarly, any strategic divestiture of a product line or business may reduce our revenue and earnings, reduce the diversity of our business, result in substantial costs and expenses and cause disruption to our employees, customers, vendors and communities in which we operate. Our information technology systems and our products are exposed to potential security breaches or other disruptions which may adversely impact our competitive position, reputation, results of operations, financial condition and cash flows. We rely on the capacity, reliability and security of our information technology systems and data security infrastructure in connection with various aspects of our business activities. We also rely on our ability to expand and continually update these systems and related infrastructure in response to the changing needs of our business. As we implement new systems, they may not perform as expected. We face the challenge of supporting our older systems and implementing necessary upgrades. In addition, some of these systems are managed by third-party service providers and are not under our direct control. If we experience a problem with an important information technology system, including during system upgrades and/or new system implementations, the resulting disruptions could have an adverse effect on our business and reputation. As customers adopt and rely on cloud-based digital technologies and services we offer, any disruption of the confidentiality, integrity or availability of those services could have an adverse effect on our business and reputation. The data handled by our information technology systems is vulnerable to security threats. Our operations routinely involve receiving, storing, processing and transmitting sensitive information pertaining to our business, customers, dealers, suppliers, employees and other sensitive matters. While we continually work to safeguard our systems and mitigate potential risks, there is no assurance that these actions will be sufficient to prevent information technology security threats, such as security breaches, computer malware, computer viruses and other "cyber attacks," which are increasing in both frequency and sophistication, along with power outages or hardware failures. These threats could result in unauthorized public disclosures of information, create financial liability, subject us to legal or regulatory sanctions, disrupt our ability to conduct our business, result in the loss of intellectual property or damage our reputation with customers, dealers, suppliers and other stakeholders. As a result of the COVID-19 pandemic and resulting government actions to restrict movement, a large percentage of our salaried employees are working remotely. This remote working environment may pose a heightened risk for security breaches or other disruptions of our information technology systems. In addition, our products, including our engines, contain interconnected and increasingly complex systems that control various processes and these systems are potentially subject to "cyber attacks" and disruption. The impact of a significant information technology event on either of our information technology systems or our products could have a material adverse effect on our competitive position, reputation, results of operations, financial condition and cash flows. We are exposed to political, economic and other risks that arise from operating a multinational business. Our business is subject to the political, economic and other risks that are inherent in operating in numerous countries. These risks include: •public health crises, including the spread of a contagious disease, such as COVID-19, and other catastrophic events; •the difficulty of enforcing agreements and collecting receivables through foreign legal systems; •trade protection measures and import or export licensing requirements; •the imposition of taxes on foreign income and tax rates in certain foreign countries that exceed those in the U.S.; •the imposition of tariffs, exchange controls or other restrictions; •difficulty in staffing and managing widespread operations and the application of foreign labor regulations; •required compliance with a variety of foreign laws and regulations; and •changes in general economic and political conditions in countries where we operate, particularly in emerging markets. As we continue to operate our business globally, our success will depend, in part, on our ability to anticipate and effectively manage these and other related risks. There can be no assurance that the consequences of these and other factors relating to our multinational operations will not have a material adverse effect upon us. We face significant competition in the regions we serve. The markets in which we operate are highly competitive. We compete worldwide with a number of other manufacturers and distributors that produce and sell similar products. We primarily compete with diesel engines and related diesel products; however, new technologies continue to be developed for gasoline, natural gas, electrification and other technologies and we will continue to face new competition from these expanding technologies. Our products primarily compete on the basis of performance, price, total cost of ownership, fuel economy, emissions compliance, speed of delivery, quality and customer support. We also face competitors in some emerging regions who have established local practices and long standing relationships with participants in these markets. There can be no assurance that our products will be able to compete successfully with the products of other companies and in other markets. Increasing global competition among our customers may affect our existing customer relationships and restrict our ability to benefit from some of our customers' growth. As our customers in emerging markets continue to grow in size and scope, they are increasingly seeking to export their products to other countries. This has meant greater demand for our advanced engine technologies to help these customers meet the more stringent emissions requirements of developed markets, as well as greater demand for access to our distribution systems for purposes of equipment servicing. As these emerging market customers enter into, and begin to compete in more developed markets, they may increasingly begin to compete with our existing customers in these markets. Our further aid to emerging market customers could adversely affect our relationships with developed market customers. In addition, to the extent the competition does not correspond to overall growth in demand, we may see little or no benefit from this type of expansion by our emerging market customers. We are subject to foreign currency exchange rate and other related risks. We conduct operations in many areas of the world involving transactions denominated in a variety of currencies. We are subject to foreign currency exchange rate risk to the extent that our costs are denominated in currencies other than those in which we earn revenues. In addition, since our financial statements are denominated in U.S. dollars, changes in foreign currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our results of operations, financial condition and cash flows. The U.S. dollar strengthened in recent years resulting in material unfavorable impacts on our revenues in those years. If the U.S. dollar continues strengthening against other currencies, we will experience additional volatility in our financial statements. While we customarily enter into financial transactions that attempt to address these risks and many of our supply agreements with customers include foreign currency exchange rate adjustment provisions, there can be no assurance that foreign currency exchange rate fluctuations will not adversely affect our future results of operations and cash flows. In addition, while the use of currency hedging instruments may provide us with some protection from adverse fluctuations in foreign currency exchange rates, by utilizing these instruments we potentially forego the benefits that might result from favorable fluctuations in foreign currency exchange rates. We also face risks arising from the imposition of foreign exchange controls and currency devaluations. Foreign exchange controls may limit our ability to convert foreign currencies into U.S. dollars or to remit dividends and other payments by our foreign subsidiaries or businesses located in or conducted within a country imposing controls. Currency devaluations result in a diminished value of funds denominated in the currency of the country instituting the devaluation. See Management's Discussion and Analysis for additional information. Significant declines in future financial and stock market conditions, particularly those related to the global recession due to the COVID-19 pandemic, could diminish our pension plan asset performance and adversely impact our results of operations, financial condition and cash flow. We sponsor both funded and unfunded domestic and foreign defined benefit pension and other retirement plans. Our pension cost and the required contributions to our pension plans are directly affected by the value of plan assets, the projected and actual rates of return on plan assets and the actuarial assumptions we use to measure our defined benefit pension plan obligations, including the discount rate at which future projected and accumulated pension obligations are discounted to a present value. We could experience increased pension cost due to a combination of factors, including the decreased investment performance of pension plan assets, decreases in the discount rate and changes in our assumptions relating to the expected return on plan assets. Significant declines in current and future financial and stock market conditions related to the COVID-19 pandemic could cause material losses in our pension plan assets, which could result in increased pension cost in future years and adversely impact our results of operations, financial condition and cash flow. Depending upon the severity and length of market declines and government regulatory changes, we may be legally obligated to make pension payments in the U.S. and perhaps other countries and these contributions could be material. We are exposed to risks arising from the price and availability of energy. The level of demand for our products and services is influenced in multiple ways by the price and availability of energy. High energy costs generally drive greater demand for better fuel economy in almost all countries in which we operate. Some of our engine products have been developed with a primary purpose of offering fuel economy improvements, and if energy costs decrease or increase less than expected, demand for these products may likewise decrease. The relative unavailability of electricity in some emerging market countries also influences demand for our electricity generating products, such as our diesel generators. If these countries add energy capacity by expanding their power grids at a rate equal to or faster than the growth in demand for energy, the demand for our generating products could also decrease or increase less than would otherwise be the case. ITEM 1B.